US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual do Utilizador descarregar pdf (Página 89)

56K Softmodem

Command Reference

- 81

Result Codes

The 56K Softmodem AT command handler responds to commands from the caller

and to activity on the line via result codes. Table 5-1: presents a summary of these

result codes.

Two forms of each result code are available. The long-form, or verbose, response

is given when V1 is selected, and the short-form, numeric response is given when

V0 is selected. The long-form code is preceded and terminated by the sequence

<CR> <LF>. The short-form is also terminated by <CR>, but it has no preceding

sequence. If result codes are suppressed, nothing is returned to the caller.

Table 5-1: Result Code Summary

Result Code Numeric

Code

Description

OK 0 Acknowledges the execution of a command line.

CONNECT 1 Modem connected to line.

RING 2 Incoming ring signal has been detected.

NO CARRIER 3 Modem lost carrier signal, does not detect carrier signal, or does not

detect answer tone.

ERROR 4 Invalid command.

CONNECT 1200 EC* 5 Connection at 1200 bits/s.

NO DIALTONE 6 No dial tone detected.

BUSY 7 Busy signal detected.

NO ANSWER 8 Remote end never answered.

CONNECT 2400 EC* 10 Connection at 2400 bits/s.

CONNECT 4800 EC* 11 Connection at 4800 bits/s.

CONNECT 9600 EC* 12 Connection at 9600 bits/s.

CONNECT 14400 EC* 13 Connection at 14400 bits/s.

CONNECT 19200 EC* 14 Connection at 19200 bits/s.

CONNECT 7200 EC* 24 Connection at 7200 bits/s.

CONNECT 12000 EC* 25 Connection at 12000 bits/s.

CONNECT 16800 EC* 86 Connection at 16800 bits/s.

CONNECT 300 EC* 40 Connection at 300 bits/s.

CONNECT 21600 EC* 55 Connection at 21600 bits/s.

CONNECT 24000 EC* 56 Connection at 24000 bits/s.

CONNECT 26400 EC* 57 Connection at 26400 bits/s.

CONNECT 28800 EC* 58 Connection at 28800 bits/s.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 107 108

Sem comentários

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual do Utilizador Página 89