US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual do Utilizador descarregar pdf (Página 69)

56K Softmodem

Command Reference

- 61

Fax Commands

FAX Commands

The 56K Softmodem supports FAX commands conforming to EIA* standard 578

and ITU-T recommendation T.31 (08/95) which outlines class 1 asynchronous

facsimile under DCE control.

The nature of FAX communication is for a facsimile machine to transmit a graphic

image to a receiving facsimile machine. As a result, most of the commands in this

section are not designed for interaction with an end user.

The commands still generate a result code to acknowledge reception and the

action taken on a command. However in many cases, the command will generate

an ERROR result code if it is not connected to a sending or receiving facsimile

device.

+FAA=<value>—Adaptive Answer

A service class 1 FAX DCE may have the ability to answer as a data modem DCE

or as a FAX DCE. It may also be able to change from class 1 FAX mode to data

modem operation in response to an incoming call.

Note: This command controls automatic switching from class 1 to class 0 for call

answering only. It does not affect call origination, switching to class 1 from other

classes, or switching to classes other than class 0.

OK if <value> = 0, 1.

ERROR if <value> does not equal 0, 1.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 107 108

Sem comentários

US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Manual do Utilizador Página 69