US Robotics COURIER Manual do Utilizador descarregar pdf (Página 201)

100

101

U.S. Robotics I-modem Command Reference

Analog Synchronous Applications • Page 16-16

Note Due to the nature of synchronous dialup, the I-modem auto-answers only

on the third or fourth ring.

Example: ATS0=1 <Enter>

5. Set the I-modem to enter clear-channel synchronous mode.

Example: AT*V2=4 <Enter>

Dialing

6. Send &M1 to have the I-modem enter synchronous mode, followed by the number to

dial. Dial should be the last command before the Carriage Return.

Example: AT&M1DT555-1234 <Enter>

Alternatively, you can combine all the previous commands into a compound command,

like this:

AT&F0B0&X0&N0S0=1&M1*V2=4DT555-1234 <Enter>

This tells the I-modem to load the Òno ßow controlÓ factory template, and then use the

V.25 answer sequence, make the I-modem the source of timing signals, set a variable

connection rate, auto-answer incoming calls, switch to online synchronous mode after

connection, enter clear-channel synchronous mode, and then dial 555-1234.

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 307 308

Comentários a estes Manuais

Sem comentários

US Robotics COURIER Manual do Utilizador Página 201

Comentários a estes Manuais

Manuais e produtos relacionados com Redes US Robotics COURIER