US Robotics 7931 Guia do Utilizador descarregar pdf (Página 44)

20 Sun StorageTek SAM Archive Configuration and Administration Guide • Version 4, Update 6, 04/07

The Sun StorageTek SAM system moves the cartridge from the mailbox to a storage

slot and updates the library catalog. In addition, after this command is issued, the

cleaning media flag is set, and the access count is set to the appropriate number of

cleaning cycles, based on the media type. Each time the cartridge is used to clean a

drive, the access count is decremented.

▼ To Use a Cleaning Cartridge Without a Barcode

If the cartridge is not barcoded, you must import it first. It is not automatically

marked as a cleaning cartridge.

1. Use the import(1M) command to import the cartridge into the automated library.

For eq, specify the equipment ordinal of the automated library as defined in the mcf

file.

2. Use the chmed(1M) command to change the type to a cleaning cartridge.

For eq, specify the equipment ordinal of the automated library. For slot, specify the

slot in which the cleaning cartridge has been loaded.

In the following example, the automated library is equipment ordinal 50 and the

cleaning cartridge is in slot 77:

3. Use chmed(1M) again to set the cleaning cycle count.

For eq, specify the equipment ordinal of the automated library. For slot, specify the

slot in which the cleaning cartridge has been loaded.

The following example command sets the count on the cartridge used in the

preceding step:

import eq

chmed +C eq:slot

# chmed +C 50:77

chmed -count count-number eq:slot

# chmed –count 20 50:77

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 287 288

Sem comentários

US Robotics 7931 Guia do Utilizador Página 44